Soft Wheel Cleaner – Acid-Free Formula for Regular Maintenance

review(s)

Soft Wheels

Ideal for regular use
Effectively cleans brake dust
Acid-free formula
Leaves a glossy finish after your wash

Shine

conditionnement

450 mL 750 mL 5 L

€39.90

Tax included

In stock

Free delivery over €99

Pay in 3 instalments, no fees

Made in France · Loire (42)

The Shine Soft Wheel Cleaner is ideal for regular maintenance of dirty and lightly soiled wheels. Its acid-free formula effectively removes brake dust, alumina particles, road film and everyday dirt, while respecting surfaces. Its lightly gelled texture reduces fumes and provides more comfortable cleaning during mechanical agitation, while also giving it better grip on your surfaces when sprayed.

Compatible with varnished, painted, satin or matte wheels, it instantly restores shine and cleanliness with no risk of dulling. For very dirty wheels, mechanical action may be necessary, or even the use of our Hard Wheel Cleaner.

It is ideal if you want to:

• clean lightly or moderately soiled wheels
• preserve the original appearance of the wheels
• save time during your washes with a product that is simple and effective to use

Despite its "Soft" positioning, this cleaner remains an effective, concentrated product. It should only be used on compatible wheels that are in good condition. If in doubt, it is recommended to carry out a test on a small, discreet area.

The Shine Soft Wheel Cleaner is thus the ideal solution for maintaining the original appearance of your wheels, saving time during your washes and keeping a clean, glossy finish.

To guarantee an optimal result while preserving your wheels, it is important to carefully follow the application steps for the Shine Soft Wheel Cleaner. Here is the recommended method:

Spray onto cold wheels
Always start on a cold wheel in the shade. Spray the product evenly over the entire surface: the outer face, spokes, recesses and, if possible, the inside of the wheel. Good coverage guarantees an even, effective action.
Leave to work for 2 to 3 minutes
Let the product work for a few moments. Its alkaline formula will begin to lift off light brake dust, road film and everyday dirt. Never let the product dry: the action must take place on a wet surface for maximum effectiveness.
Carry out mechanical action to loosen the dirt
Using an XS wheel brush, a T1 wheel and tyre brush, a microfibre wheel brush or a detailing brush, scrub the surface to help detach the contaminants.
Rinse thoroughly with water
Once cleaning is complete, rinse the wheel generously, ideally with a hose or a high-pressure washer. Make sure to completely remove the product to avoid any residual marks.

For an optimal result, dry the surface using a blower dryer or a drying microfibre. You can then apply a Shine Wheel Protection to preserve the surface over time and make future cleaning easier.

Volume	—
pH	13
Dilution	—
Surfaces	—
Compatibility	—
Hazards	Corrosive H314 — Provoque de graves brûlures de la peau et de graves lésions des yeux

Reference	AS01-5
EAN13	3701560102650
Bidon & Buse	With trigger

Usage tips

To guarantee an optimal result while preserving your wheels, it is important to carefully follow the application steps for the Shine Soft Wheel Cleaner. Here is the recommended method:

Spray onto cold wheels
Always start on a cold wheel in the shade. Spray the product evenly over the entire surface: the outer face, spokes, recesses and, if possible, the inside of the wheel. Good coverage guarantees an even, effective action.
Leave to work for 2 to 3 minutes
Let the product work for a few moments. Its alkaline formula will begin to lift off light brake dust, road film and everyday dirt. Never let the product dry: the action must take place on a wet surface for maximum effectiveness.
Carry out mechanical action to loosen the dirt
Using an XS wheel brush, a T1 wheel and tyre brush, a microfibre wheel brush or a detailing brush, scrub the surface to help detach the contaminants.
Rinse thoroughly with water
Once cleaning is complete, rinse the wheel generously, ideally with a hose or a high-pressure washer. Make sure to completely remove the product to avoid any residual marks.

For an optimal result, dry the surface using a blower dryer or a drying microfibre. You can then apply a Shine Wheel Protection to preserve the surface over time and make future cleaning easier.

Subtitle

Your wheel cleaner for regular use

Key features

Ideal for regular use
Effectively cleans brake dust
Acid-free formula
Leaves a glossy finish after your wash

Usage requirements

Mask, gloves, goggles mandatory

Why choose this product?

Choosing our Soft Wheel Cleaner means opting for an effective product, accessible to everyone and perfectly suited to the regular maintenance of your wheels, for both private individuals and professionals. Its high-performing alkaline formula (pH 13) quickly removes brake dust, road film and alumina deposits, while ensuring excellent compatibility with varnished, painted, chromed or matte wheels.

Designed to offer effective cleaning without resorting to acidic detergents, it keeps wheels clean, glossy and protected day after day. Ideal for those looking for a powerful, reliable wheel cleaner optimised for frequent use.

Pro tips

Here is our team's advice for getting the most out of the Soft Wheel Cleaner and achieving a result worthy of a professional detailing centre.

For a professional, wheel cleaning does not stop at the wheel. It is a methodical process that guarantees a perfect finish and lasting protection.

Preparation: don't neglect the tyres
Always clean the tyre sidewalls before dealing with the wheels. Use our Universal Cleaner (APC) with a T1 wheel and tyre brush to degrease the rubber. Why? Because if the tyre stays dirty, the residue will run onto the clean wheel during rinsing. Once the tyre is perfectly clean, the Soft Wheel Cleaner will work far more effectively on a well-defined surface.

Work on a cold surface (pH 13 requirement)
With a pH of 13, this product's chemistry is powerful. Never work on a hot wheel or in direct sunlight. Heat would cause the water contained in the product to evaporate, increasing the alkaline concentration and risking marking the varnish. Touch the wheel with the back of your hand: if it is warm, cool it down with clean water before starting.

The importance of targeted mechanical action
For weekly maintenance on a well-kept vehicle, this product can be used in "touchless" mode (contactless). However, for a flawless result:

• Use an XS wheel brush for lug nut recesses and narrow areas.
• Use a soft-bristle brush for the outer face and spokes.

The "plenty of water" rinsing technique
Rinsing is the key step, during which many make the mistake of rushing. With an alkaline formula, it is essential to rinse thoroughly, paying particular attention to the brake calipers and nuts. No residue should remain. Rinse from top to bottom, then turn the vehicle's wheels a quarter turn and rinse again to reach the areas hidden by the spokes.

Drying and protection: the finishing touch
Do not let your wheels air-dry, to avoid limescale marks. Use a dedicated drying microfibre. Once the surface is perfectly dry, we advise applying a wheel protection. This will create a hydrophobic barrier that limits brake dust from embedding, making future washes faster and easier.

Hazards

H314 — Provoque de graves brûlures de la peau et de graves lésions des yeux

Precautionary statements

P101 — En cas de consultation d'un médecin, garder à disposition le récipient ou l'étiquette
P102 — Tenir hors de portée des enfants
P260 — Ne pas respirer les vapeurs
P264 — Se laver les mains soigneusement après manipulation
P280 — Porter des gants de protection/des vêtements de protection/un équipement de protection des yeux
P301+P330+P331 — EN CAS D'INGESTION: rincer la bouche. NE PAS faire vomir
P303+P361+P353 — EN CAS DE CONTACT AVEC LA PEAU (ou les cheveux): Enlever immédiatement tous les vêtements contaminés. Rincer la peau à l'eau [ou se doucher]
P304+P340 — EN CAS D’INHALATION: transporter la personne à l’extérieur et la maintenir dans une position où elle peut confortablement respirer
P305+P351+P338 — EN CAS DE CONTACT AVEC LES YEUX: rincer avec précaution à l'eau pendant plusieurs minutes. Enlever les lentilles de contact si la victime en porte et si elles peuvent être facilement enlevées. Continuer à rincer
P310 — Appeler immédiatement un CENTRE ANTIPOISON/un médecin
P363 — Laver les vêtements contaminés avant réutilisation
P405 — Garder sous clef
P501 — Éliminer le contenu/le récipient dans un centre de traitement agréé conformément à la réglementation internationale/locale/nationale/régionale

What type of wheels can the Soft Wheel Cleaner be used on?

Answer: Yes, you can use it on aluminium wheels provided they are varnished or painted. This product is an alkaline solution with a pH of 13, which gives it great effectiveness on road film without using aggressive acids. However, this power calls for certain precautions:
• Compatible surfaces: It is perfectly safe for original (OEM) varnished aluminium wheels or wheels that have been repainted by a professional (body shop).
In the case of a recent paint job, make sure that the varnish is completely dry and cured (fully polymerised).
• Surfaces to avoid: Due to its high pH, use is strongly discouraged on bare (unfinished) aluminium, mirror-polished aluminium or anodised finishes (such as the famous Fuchs wheels). On these materials that are not protected by a varnish, an alkaline product can cause dulling or irreversible whitish marks.
• Precautions on damaged surfaces: If your wheels have chips in the varnish, deep scratches or signs of corrosion, the solution could seep under the protective layer. In this case, or if in doubt about the finish of your wheels, we recommend always carrying out a test on an inconspicuous area or opting for manual cleaning with our neutral shampoo.

Do you need to scrub?

Answer: Using a brush is not always essential; it mainly depends on how dirty your surfaces are.
Thanks to its powerful alkaline formula, the Soft Wheel Cleaner offers excellent touchless cleaning capability in certain scenarios:

• For regular maintenance: If you clean your vehicle every week and the brake dust is light, the product may be enough on its own. Spray, leave to work, then rinse with high pressure: the road film will come off effortlessly.

• For very dirty wheels: As soon as dirt has built up or brake dust has "baked" onto the varnish, mechanical action becomes necessary. In this case, we recommend using an XS wheel brush or a detailing brush to work the product in.

Why scrub? Scrubbing physically lifts off the embedded brake and carbon particles that chemistry alone cannot fully break down. For a professional result and a flawless finish in the smallest nooks (spokes, lug nut recesses), a quick pass with a brush remains the go-to method.

Where is it made?

The Soft Wheel Cleaner is proudly designed, formulated and packaged in France.

At Shine, we have made the choice of transparency and local quality. Product development is carried out by our teams, manufacturing is handled in France in specialised laboratories, and the entire process — from quality control to bottling — is carried out in Andrézieux-Bouthéon, in the Loire (42).

Choosing a product made in France gives you the assurance of several benefits:

• Mastered expertise: each formula is tested and validated by our detailing experts to meet the demands of the French market.

• Consistent quality: local packaging allows us to ensure rigorous control of each batch before shipping.

• An eco-responsible commitment: by favouring short supply chains, we reduce the carbon footprint linked to transport while supporting the local economy and jobs.

By choosing this cleaner, you support a passionate French brand committed to offering car care solutions that are high-performing, reliable and responsible.

Optimise your wash