Car Iron Fallout Remover – Wheels & Bodywork | Shine

review(s)

Iron Fallout Remover

Removes ingrained iron particles
Purple visual reaction on contact with iron
Usable on all exterior surfaces of the vehicle
Prepares the surface before protection

conditionnement

450 mL 750 mL 5 L

€24.90

Tax included

In stock

Free delivery over 99 €

Pay in 3 instalments, no fees

Made in France · Loire (42)

Even after a careful wash, some contamination remains on the bodywork and wheels. Iron particles from brake dust and industrial pollution gradually become ingrained in the clear coat. Invisible to the naked eye, they make the surface rough to the touch and dull the overall appearance of the vehicle.

The Iron Fallout Remover eliminates these specific contaminants, which ordinary shampoos cannot remove. Its formula reacts chemically with the metal particles, dissolves them and detaches them from the surface, without aggressive mechanical action. During application, the product changes colour, which lets you see it working and check its effectiveness.

Usable on all of the vehicle's exterior surfaces (wheels, bodywork, plastics, glass), its pH-neutral, acid-free formula also allows safe application on surfaces protected by sealants, waxes or any other type of protection.

The Shine Iron Fallout Remover can also be used as a wheel cleaner when the wheels are lightly soiled, to remove the iron particles associated with brake dust. In this case, it provides effective, targeted cleaning. However, if the wheels are heavily soiled, it is strongly recommended to first use a suitable wheel cleaner to remove greasy, accumulated dirt. The iron fallout remover then acts as a complement, to specifically treat the remaining metal particles.

Shake the product well
Spray the product directly onto the surface to be treated.
Let the product work for 2 to 3 minutes.
Watch the product react, then rinse thoroughly with clean water. Rinsing with a high-pressure jet is strongly advised and helps loosen the contaminants.
Dry carefully after rinsing.

Good to know: Do not apply on a hot surface or in direct sunlight. Do not let the product dry. Do not use on surfaces it is not intended for without a preliminary test. Keep out of reach of children.

Volume	—
pH	6,5 – 7,5
Dilution	—
Surfaces	—
Compatibility	—
Hazards	Warning H302 — Nocif en cas d'ingestion H317 — Peut provoquer une allergie cutanée H319 — Provoque une sévère irritation des yeux

Optimise your wash

recommended with this product

Shine decontamination mitt – Car paint decontamination

Gant de Décontamination

review(s)

€19.90

Medium car clay bar – Bodywork decontamination | Shine

Medium Clay Bar

review(s)

€8.90

Soft Wheel Cleaner – Acid-Free Formula for Regular Maintenance

Soft Wheels

review(s)

€7.90

Out of stock

Car tar and resin remover – Bodywork decontamination | Shine

Tar & Resin Remover

review(s)

Ceramic coating for car wheels – Protection & easy cleaning | Shine

Wheel ceramic

review(s)

€19.90

what you ask us most

Frequently asked questions

On which surfaces can the iron fallout remover be used?

The Shine Iron Fallout Remover is compatible with bodywork, glass, clear coat, varnished or painted wheels and certain metal surfaces. It is recommended to test on an inconspicuous area before first use.

Is it normal for the product to change colour?

Yes. The colour change indicates that the product is reacting with the iron particles present on the surface. This lets you see the fallout remover working and know when to rinse.

Should an iron fallout remover be used at every wash?

No. The Shine Iron Fallout Remover is an occasional decontamination product, not an everyday maintenance product. It is recommended to use it around 2 to 4 times a year, depending on how the vehicle is used, the mileage and the environment (city, motorway, industrial areas). Using it too frequently is unnecessary and provides no additional benefit during an ordinary wash.