Car Acid Shampoo – Limescale & Water Spot Decontamination | Shine

review(s)

Acid Shampoo

Removes pollutants, oxidation and limescale deposits
Acid formula for powerful action
Alkaline wash mandatory after use

Shine

€15.90

Tax included

In stock

Free delivery over €99

Pay in 3 instalments, no fees

Made in France · Loire (42)

Over time, bodywork is exposed to hard water, mineral-laden rain and limescale deposits that can leave visible marks and dull the appearance of the vehicle. These residues are generally not removed by an ordinary or neutral shampoo.

The Shine Acid Shampoo was developed to meet this specific need. Its acid formulation effectively dissolves mineral deposits, water spots, limescale film and other inorganic residue present on the bodywork. After use, the surface regains a cleaner, sharper and more uniform appearance.

Due to its pH of 2, it should not be used for regular washing but rather as part of a complete detailing process. A wash with an alkaline shampoo is required after use. You can use our Bodywork Shampoo, our Dewaxing Degreasing Shampoo or our Gloss Finish Shampoo. Wearing gloves and goggles is mandatory.
This shampoo is particularly useful during decontamination phases, when resetting the bodywork or before applying a protection. It is not used as an everyday maintenance shampoo, but as an occasional tool to correct specific issues related to limescale and mineral marks.

Used correctly, the Shine Acid Shampoo improves the surface condition, facilitates the following steps and optimises the durability of protections applied afterwards.

Dilute your shampoo at a rate of 10ml per litre of water for hand washing and at a rate of 100ml for washing with a foam cannon.
Using a microfibre mitt or a microfibre sponge, scrub the parts of your vehicle from top to bottom.
Rinse your mitt regularly to avoid keeping contaminants on your wash mitt, and use a different mitt for cleaning your sills.
Rinse the washed parts thoroughly*.
*Remember to rinse your vehicle thoroughly after use; as the product dilutes in water it is no longer visible when you rinse, but the chemistry is still present on your vehicle. It is therefore important to take the rinsing step seriously for an optimal result.

Good to know: Can be used with a foam cannon or a bucket. Be careful not to over-dilute the product. It will not be any more effective for it; the recommended dilutions have been worked out to give you an effective and economical wash without risk. E.g.: in the case of chrome trims or shadow lines, too great a dilution could mark these often very delicate parts. Do not apply the product in direct sunlight.

Volume	—
pH	—
Dilution	—
Surfaces	—
Compatibility	—
Hazards	—

Reference	AS15-750
EAN13	3701560103138
Bidon & Buse	Without trigger

Usage tips

Dilute your shampoo at a rate of 10ml per litre of water for hand washing and at a rate of 100ml for washing with a foam cannon.
Using a microfibre mitt or a microfibre sponge, scrub the parts of your vehicle from top to bottom.
Rinse your mitt regularly to avoid keeping contaminants on your wash mitt, and use a different mitt for cleaning your sills.
Rinse the washed parts thoroughly*.
*Remember to rinse your vehicle thoroughly after use; as the product dilutes in water it is no longer visible when you rinse, but the chemistry is still present on your vehicle. It is therefore important to take the rinsing step seriously for an optimal result.

Good to know: Can be used with a foam cannon or a bucket. Be careful not to over-dilute the product. It will not be any more effective for it; the recommended dilutions have been worked out to give you an effective and economical wash without risk. E.g.: in the case of chrome trims or shadow lines, too great a dilution could mark these often very delicate parts. Do not apply the product in direct sunlight.

Subtitle

Removes mineral deposits and stubborn marks for clean bodywork

Key features

Removes pollutants, oxidation and limescale deposits
Acid formula for powerful action
Alkaline wash mandatory after use

Usage requirements

Goggles required

Why choose this product?

The Shine Acid Shampoo is ideal for correcting problems with limescale marks and mineral deposits that resist ordinary washes. It restores the bodywork, improves the surface condition and effectively prepares the vehicle before a protection. Used at the right time, it is a precise and effective tool.

Pro tips

In most cases, limescale marks and mineral deposits do not come from the washing itself, but from insufficient drying. In roughly 80% of situations, simply drying the vehicle well after a standard wash is enough to prevent the appearance of marks and deposits linked to hard water.

Before considering the use of an acid shampoo, make sure the vehicle has been washed correctly and then dried using a suitable drying microfibre. Careful drying strongly limits the appearance of water marks and helps preserve the appearance of the bodywork.

The Shine Acid Shampoo should only be used when limescale marks are already present and ingrained. It acts as an occasional corrective solution, not as a systematic step. This approach helps preserve the paint, limit unnecessary treatments and optimise the durability of protections applied afterwards.

What is an acid shampoo for cars used for?

An acid shampoo removes the mineral deposits, limescale marks and inorganic residue that ordinary shampoos cannot remove.

Can it be used at every wash?

No. The Shine Acid Shampoo is intended for occasional use, when the bodywork shows limescale marks or specific deposits. For regular maintenance, it is recommended to use a standard, neutral or beading shampoo in the case of protected surfaces.

Can it damage the paint or the clear coat?

No, provided it is used correctly and in accordance with the recommendations. The Shine Acid Shampoo was developed to act on mineral deposits without attacking the paint or the clear coat.

Optimise your wash